Temporarily Stopping Roof Leaks

If you have discovered water leaking in an area of your home when there is precipitation occurring, you will want to have it repaired quickly so your home and rooftop do not sustain excessive damage. If you need to wait a few days for a residential roofing contractor to come to your aide, and you know there is more precipitation in the forecast, there are a few ways you can temporarily patch the leak so it does not continue. Here are a two ways you can keep moisture from getting into your home when you are waiting for a contractor to fix a roof leak.

Use A Tarp

Place a large vinyl tarp on top of your rooftop so that moisture will slide down its surface toward your gutters instead of through cracks or holes around your shingles. Check to see where the water is getting inside and center the tarp outside on your roof over this area. Many times, if a home has a sloped rooftop, the origin of water entry will be well above where it collects and drips inside. Centering the tarp over the leaking area may help cover the spot above where the water is getting under shingles.

Many tarps come with grommet holes along all the edges or in the corners. Use these to tie the tarp in place as it can become dangerous if winds become high. Thread a piece of thin rope or twine through the grommet holes and secure the tarp by tying it to a nearby tree, a trash can, or your gutter. Do not use weights on your roof, as they can cause damage to your home or injure someone walking below if they happen to roll down.

Try Some Cement

Roofing cement is used to keep shingles from sliding or flapping when windy conditions arise. You can use this cement to help seal areas where leaks are occurring until a residential roofing contractor can get to your home to switch out decayed shingles with new ones. Simply brush the cement over your existing shingles to make a barrier between the shingles and the elements. If you happen to have a spare shingle, use the cement to glue it on top of the area where leaking seems to be happening. The contractor will peel these shingles back and place new ones in their place.

If wet weather is imminent and you do not have time to wait for cement to dry, try using wet patch roofing material to fill in any known holes. This material is applied using a putty knife. It has the consistency of mud, so gloves should be worn when applying it. It has the advantage that it will patch holes without needing to dry or harden, making it a great choice if there is a heavy rainstorm on the way. Visit http://www.bobbehrendsroofing.com for more information.


Share